Large scale vacuum drying oven designed for treatment of large-sized parts
Performance and functions
- Vacuum pump can be installed inside the oven
- Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance
- Because the exhaust system is improved to significantly shorten the time to reach vacuum, working efficiency is improved.
- Use specialized function menu key and ▲▼ key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc.
Safety features
- Self-diagnostic functions (abnormal temperature sensor, heater disconnection, auto overheat prevention, SSR short circuit), overheat protector, ELB to prevent overcurrent, key lock, etc.
- For safety, resin protection panel is installed at the observation window
| Model | DP83C | DP103C | |
| Method | Decompression • chamber wall heating | ||
| Operating Temp. Range | 40~200°C | ||
| Operating Vacuum Range | 101~0.1kPa (760~1Torr) | ||
| Temp. Adjustment Accuracy | ±1.0°C (at 200°C) | ||
| Interior | Stainless steel plate | ||
| Exterior | Cold rolled steel plate with chemical proofing coating | ||
| Insulating Material | Glass fiber | ||
| Heating Method | Decompressed chamber wall direct heating | ||
| Heater Power | 6.5kW | 14.4kW | |
| Observation Window | Toughened glass + resin protection panel | ||
| Vacuum Gauge | Pointer type, -100~0kPa | ||
| Vacuum Pump Installation Room | Yes | ||
| Temp. Control | 3 segments PID | ||
| Temp. Setting | Use specialized function menu key and up/down key to set | ||
| Temp. Display | Measured temp. display: green 4-digit LED digital display Setting temp. display: red 4-digit LED digital display |
||
| Timer | 1min-99 hr 59 min and 100 hr-999 hr 50 min (attached with timing wait function) | ||
| Operation Function | Fixed temp. auto start, auto stop, program operation | ||
| Program Mode | Program operation 3 segments 30 steps (30 steps×1, 15 steps×2, 10 steps×3) | ||
| Additional Function | Deviation correction, key lock, power outage compensation | ||
| Heater Circuit Control | SSR driving | ||
| Sensor | K thermocouple (temp. controller and overheat protector) | ||
| Safety Device | Self-diagnosis circuit (abnormal temp. sensing, heater disconnection, auto overheat prevention, SSR short circuit), overheat protector, EBL to prevent overcurrent, key lock, etc. | ||
| Internal Dimensions W×D×H | 800×800×800 mm | 1000×1000×1000 mm | |
| External Dimensions W×D×H | 1020×1020×1850 mm | 1300×1280×2110 mm | |
| Internal Capacity | 512L | 1000L | |
| Air Exhaust Port | NW40 flange | ||
| Air Suction Port | Rc 3/8 | ||
| Power Source (50/60Hz) Rated Current | AC220V 31.5A (no plug, round terminal) | 3 phase AC380V 27A (no plug, round terminal) | |
| Weight | ~450kg | ~1000kg | |
| Accessories | Stainless steel punching plates, 2 pcs. | Stainless steel punching plates, 4 pcs. | |
0091F Assorted Fluorescent Polypropylene Reversible 1.5ml And 2.0ml Microcentrifuge Tube Rack, 96 Places (Pack Of 5) Bio Plas
0090 Natural Polypropylene Reversible 1.5ml And 2.0ml Microcentrifuge Tube Rack, 96 Places (Pack Of 5) Bio Plas 



